Great Planes PT-19 EP ARF - GPMA1149 - Manual (Page 6)

6
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes PT-19 EP ARF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can
be provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Great Planes web site
at www.greatplanes.com. Select “Where to Buy” in the
menu across the top of the page and follow the instructions
provided to locate a U.S., Canadian or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
® or MasterCard ®
number and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N Apollo Drive, Suite 1
Champaign IL 61822
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason contact
Product Support by e-mail at productsupport@greatplanes.
com, or by telephone at (217) 398-8970.
Order No. Description
NOTE
REPLACEMENT PARTS LIST
Fuselage
Wing
Tail Surface Set
Landing Gear Set
Cowl
Decal GPMA4000
GPMA4001
GPMA4002
GPMA4003
GPMA4004
GPMA4005
Full-size plans are not available.
You can download a copy of this
manual at www.hobbico.com.
BEFORE YOU BEGIN
Before you begin assembling your model, inspect it for
wrinkled covering and areas where the covering may not
be tacked down adequately. The covering should be tacked
down to the wood using just enough heat to soften the
adhesive backing. Low heat (about 250° F [121° C]) should
be enough to accomplish this. More heat may be required to
begin to tighten the covering.
ASSEMBLE THE WINGS
Join the Wings
❏
1. For the next few steps you will need epoxy, mixing
cups, mixing sticks, and a few epoxy brushes. You should
also have some denatured alcohol and paper towels on
hand for cleanup.
❏
2. Mix up a small batch of 6-minute epoxy and glue the
2mm thick wing joiner and 3mm thick wing joiner together