Cabletron Systems 2E48-27R - Manual (Page 125)

Network Tools
2E48-27R/2E49-27R User’s Guide 5-79
5.23 NETWORK TOOLS
The Network Tools function allows the user to access and manage
network devices.
Figure 5-31 shows the Network Tools Help screen.
To access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Device Menu screen and press
ENTER. The Network Tools Help screen displays.
Figure 5-31 Network Tools Help Screen
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
TIP
Type help at the prompt to list all the commands that are
available for the device in the current operational mode. A
command used incorrectly (wrong syntax) will prompt a display
of the correct usage. Use lower case characters when entering
commands in Network Tools.
-> help
09081-29
arp
netstat
show traceroute
defroute
ping reset
bridge
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help '.
->
Commands Available to User
Built in Commands:
Welcome to Network Tools
soft_reset telnet link_trap
atm_stp_state