Cabletron Systems 2E48-27R - Manual (Page 115)

Switch Statistics Screen
2E48-27R/2E49-27R User’s Guide 5-69
Frames Rcvd (Read-Only)
Displays the number of frames received by the interface since last
power-up or reset.
Frames Txmtd (Read-Only)
Displays the number of frames transmitted by the interface since last
power-up or reset.
Frames Fltrd (Read-Only)
Displays the number of frames filtered by the interface since last
power-up or reset.
Frames Frwded (Read-Only)
Displays the number of frames forwarded by the interface.
[1-12], [13-24], or [25-27] (Navigation Key)
When the Switch Statistics screen displays, the statistics are displayed for
the first 12 ports. These fields allow the user to step to a second or third
screen for the same type of information for ports 13 through 24 or 25
through 27. While on the second or third screen, the user can navigate
back to earlier screens by highlighting the [1-12]
and/or [13-24] fields and
pressing ENTER.
CLEAR COUNTERS (Command)
This command clears all the counters of the ports displayed to zero. For
details on how to use this field, refer to
Section 5.20.1 .
5.20.1 Using the Clear Counters Command
To reset all the counters of the ports displayed to zero, perform the
following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command.
2. Press ENTER, the counters are reset to zero.