Cabletron Systems 2E48-27R - Manual (Page 25)

2E48-27R/2E49-27R User’s Guide 3-1
CHAPTER 3
INSTALLATION
This chapter provides all instructions required to install the 2E4X-27R. A
Phillips screwdriver is required to install options into the device or install
the device into a rack. Follow the order of the sections listed below to
correctly install the 2E4X-27R.
• Unpacking the 2E4X-27R ( Section 3.1 )
• Installing Options ( Section 3.2 )
• Installing the 2E4X-27R (on a shelf or tabletop, or into a standard
rack) (
Section 3.3 )
• Connecting to the Network ( Section 3.4 )
• Completing the Installation ( Section 3.5 )
3.1 UNPACKING THE 2E4X-27R
Unpack the 2E4X-27R as follows:
1. Open the box and remove the packing material protecting the
2E4X-27R.
Only qualified personnel should install the 2E4X-27R.