Description of controls (confd) 5, Vcr controls, 32 tape speed button – Philips VR350 User Manual
Page 5: 33 vcr power button, 34 vcr/iv button, 35 memo(ty) button, 36 tracking buttons, 37 go-to button, 38 status button, 39 menu button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Description of Controls (confd) 5
Remote Control Transmitter
VCR Controls
32 Tape SPEED Button
Press to select recording speed (SP, SLP). In playback,
the tape speed is automatically selected (SP, LP, SLP).
33 VCR POWER Button
Press to turn VCR power ON or OFF. Also, used to set
the VCR for unattended timer recording.
34 VCR/iV Button
Press to select the signal source that your TV receives.
TV position
(VCR
indicator on the display panel: OFF)
To watch TV or to watch one program while recording
another.
VCR position
(VCR indicator on the display panel: ON)
To watch a tape, monitor a recording, or watch a TV
broadcast selected with the VCR’s channel selector.
35 MEMO(ty) Button
Press to memorize the tape position at which the counter
was reset to “0:00:00.”
36 TRACKING Buttons
In the Play and Slow modes, when playing a tape, press
TRACKING “A.” or button to adjust the tracking.
37 GO-TO Button
This button can make search easier by allowing you to
skip back or ahead on a tape. Press this button and select
desired counter number with NUMBER buttons.
Mowed by PLAY/STOP button.
38 STATUS Button
Press this button to display the time counter, time,
function, and channel number.
39 MENU Button
Press to call up the on-screen menu display.
40 CLEAR Button
• To erase incorrect or unwanted data in on-screen
menu operation.
• To reset the tape counter. “0:00:00” will appear on the
TV screen.
41 VCR CH(annel) UP/DOWN.
Press “A” or to scan up or down through the
VCR’s channels. Release at desired channel.
42 NUMBER Buttons
(0,1,2,3,4,5,6,7,8 and 9)
Use for chaimel selection, on-screen menu selection,
clock setting, program setting, etc. For selecting channels
1 to 9, first press “0” button and then press “1” to “9.”
(100)
Press this button first when selecting channels 100 and
higher.
43 SLOW Button
Press during SP or SLP playback to view a slow-motion
picture.
44 SLOW/VAR(iable) SLOW Buttons
First press the SLOW button during SP or SLP playback
to view a slow-motion picture. The speed can be varied
from about 1/6 to about 1/30 of normal speed with the
VAR(iable) SLOW button.
45 REW{ind)/SEARCH Button
Press to rewind the tape at high speed. Also, during
playback, press this button to view the picture in rapid
reverse visual search.
46 PAUSE/STILL Button
• Press once to temporarily stop the tape during
recording (Pause).
• Press once to freeze the tape picture during playback
(Still).
• Press again when you want to resume normal
playback or recording.
47 REC/OTR Button
Press to start recording. Select the chatuiel and press this
button to start an immediate recording 30 minutes to 9
hours long. Each press delays the shut-off time by 30
minutes. Power shut
off
is automatic.
48 FF (Fast Forward)/SEARCH Button
To move the tape forward at high speed. Also, during
playback, press this button for rapid forward visual
search.
49 STOP Button
Press to stop the tape.
50 PLAY Button
• Press to play back a tape.
• Press to release the Slow or Search mode and return to
playback.