Philips VR350 - Manual (Page 16)

NORMALPROGRAM
PROGRAM 1
CHANNEL ^^0
"Ts~
TIME ON
Select the “TIME ON”
I First, press two NUMBER buttons for the hour.
' Next, press two NUMBER buttons for the
minute.
Now, press NUMBER button “1” for AM or
“2” for PM.
For example, for 9:30 PM, press NUMBER buttons 0-9,3-0,2.
TO CORRECT PUSH CLEAR
TO ea> PUSH MENU
Select the “TIME OFF”
I First, press two NUMBER buttons for the hour.
' Next, press two NUMBER buttons for the
minute.
For example, for 10:00 PM, press 1-0,0-0,2.
N<^?MAL PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON
”T“
TIME OFF
TO CORRECT PUSH Cl£AR
TOENDPUSHMSA5
Select the Recording Speed
I Press the 1 or 2 button to choose SP (Standard
Play) or SLP (Super Long Play).
You cannot use the SPEED button on the
remote control to choose the recording speed.
i NORMALPROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 0930 PM
TIME OFF JQ'OOPM
REC SPEED
SPol SLP
TO CORRECT PUSH Cl£AR
L
TO END PUSH MENU
J
Select the “START DATE”
I First, press two NUMBER buttons for the month.
I Next, press two NUMBER buttons for the day.
For example, to make a recording on July 1,
press 0-7,0-1.
The year and day of the week will be displayed
automatically.
Confirm Your Program
1 Press the MENU button.
“PROGRAM WAS COMPLETED” should appear on the screen.
If “PROGRAM NOT COMPLETED” appears, please try again
from step 1 on page 15.
After 3 seconds, the display will disappear from the screen, and the
normal TV picture will reappear.
The TIMER Indicator will light up on the VCR.
Select the Next Program
I If needed, press the MENU button and repeat steps 2 to 10.
Set the Timer
When finished, press the POWER button to OFF on the remote
control.
After a Timer Recording Has Taken Place
Press the POWER button on the remote control to return your VCR
(Video Cassette Recorder) to normal operation.
[- If the Power Should Fail...
repeat the steps on pages 8 and 9 before setting up a Tmier
Recording.
( NORMALPROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 0930 PM
TIME OFF 1030 PM
REC SPEED SP
START DATE OZOl/SS
SAT.
TO CORRECT PUSH 0£AR
1, TOENOPUSHMENU
Check or Clear Timer Recordings
1. TUm the VCR on. VCR must be in VCR
mode.
2. First, press the MENU button.
Next, press the 1 button to select
“PROGRAM.”
Now, press the 4 button to select
“PROGRAM REVIEW.”
The Timer Record information for the
lowest numbered position (1 - 8)
appears.
( NORMALPROGRAM ^
PROGRAM 1
CHANNEL 10
TIME ON 0930 PM
TIME OFF 1030 PM
REC SPEED SP
START DATE 07,01/95
SAT.
TO CANCa PUSH CLEAR
^ NEXTol BJOsMBAJ )
3. Press the 1 button repeatedly to view all
the filled positions.
If you do not press the 1 button, after 10
seconds the display changes to the next
filled position. This continues until all
filled positions appear. Finally, the
screen returns to the previous on-screen
menu.
4. Press the CLEAR button to clear a filled
position.
5. At any time, press the MENU button
once to exit the Program Review mode.
6. Repeat steps 1 - 4 to make sure you
have cleared the correct filled positions.
To fill a position, follow “Tuner
Recording” steps 1 -12.
NOTE: This function does not work with
OTR (One Touch Recording).
Stop a Started Timer Recording
1. Press the POY/ER button.
• Timer recording is cancelled and VCR
power turns off.
Today’s recording stops. If it is a Daily or
Weekly recording, future recordings will be
carried out as programmed.