Philips VR350 - Manual (Page 21)

Re-Setting Your VCR’s Tuner 21
T o place receivable channels in your VCR (Video Cassette Recorder), follow steps 1- 4 below. This function lets you re­
program your VCR’s tuner at any time.With the Add/Delete feature you can add or delete any channel. You must use
your remote control.
1 Make sure...
the steps on pages 7-8 have been completed, and your TV and
VCR are on.
to make each entry within 60 seconds, otherwise the VCR will exit
the Ibner Set Up mode and you will have to start over.
MENU Button
VCR CH(ann8l)
UP/DOWN Buttons
NUMBER Buttons
Display the Tuner Set Up Mode
I First, press the MENU button to display the
’ main menu screen.
Now, press the NUMBER 3 button to select
“TUNER SET UR”
The screen at right appears.
TO SELECT IHKH NO. SHO'^
1TV [ON]
2CABLETV
3AUTO PROGRAMMING
4ADD.-DELETECH
5 CHMEMORY REVIEW
TO END PUSH MENU
Start Auto Program
I Press the NUMBER 3 button to start Auto
' Programming. “AUTO SET PROCEEDING,
PLEASE WATT’ appears on the TV screen.
AUTO SET proceed : nb
PLEASE WAtT
Remote Control
Finish Auto Program
1 When auto program is complete, “AUTO SET COMPLETED”
appears on the TV screen, and then the lowest channel stored in the
VCR’s memory will appear on the TV screen. To view other stored
chaimels, press the VCR CH(annel) UP/DOWN button. Line mode
is always stored in the VCR’s memory. “L” appears on the VCR’s
front panel when selected using the VCR CH(armel) UP/DOWN
button.
p Adding and Deleting a Channel
1. Press the MENU button to display the menu screen. Next, press
the 3 button to select “TUNER SET UP.”
2. Press the 2 button to change from “TV” to “CABLE TV.”
Press the 1 button to change from “CABLE TV” to “TV.”
“[ON]” appears beside your selection.
3. Press the 4 button to select the Add/Delete
channel feature. The display shown here
will appear.
4. Press two numbers to add or delete charmels
up to 99. For 100 and higher, first press the
1(X) button, then two numbers.
• Always enter a “0” before any single-digit
entries. For example, 0, then 6 for “6.”
• Refer to “Using the 100 Button” to enter a
three-digit number.
5. Press the 1,2, or 3 button to “ADD,”
“DELETE,” or “SELECT ANOTHER CH”
that is in the VCR’s memory.
If “3” is selected, the display in step 3 will re-appear.
To exit the Add/Delete mode, press the MENU button once.
SELECT CHANNEL NUMBER
TO END PUSH MENU
TO SaECT PUSH NUMBER
1 ADO
2 DELETE
3 SELECT ANOTHER CH
TO END PUSH MENU
P Channel Memory Review
First, press the MENU button. Next, press
the 3 button to select “TUNER SET UP.”
Now, press the 5 button to select “CH
MEMORY REVIEW.” The memorized
charmel list will appear on the TV screen.
Now, press the 1 button to see the next
channel list. Press the
2 button to see the
previous channel list
To exit, press the
MENU button.
' memorized CHANNEL; CABLED
15 17 20 21 27 31
32 36 42 43 45 47
50 51 52 66 64 67
63 70 73 75 78 SO
61 63 64 66 68 63
90 92 55 104 107 112
NEXT-t PREVIOUS-2
TO END PUSH MENU_________
P Using the 100 Button
To select channel munbers 100 to 125 with
the NUMBER buttons, first press the 100
button and then enter the remaining two
numbers. For example for channel 105,
press NUMBER buttons 100,0,5.