4 description of controls (cont’d), 20 ac (alternating current) power cord, 21 audio in(put) jack – Philips VR350 User Manual
Page 4: 22 audio out(put) jack, 23 video out(put) jack, 24 video ln(put)jack, X25ch3/ch4 switch, 26 rf out(put) jack (out to tv set), 27 ant(enna) in(put) jack (in from antenna), 28 tv power button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4 Description of Controls (cont’d)
Rear Panel
Remote Control Transmitter
TV Controls
20 AC (Alternating Current) Power Cord
Connect the AC Power Cord to a household outlet.
21 AUDIO IN(put) jack
For audio input connection from the output jack of a
portable video camera, another VCR, or another audio
source.
22 AUDIO OUT(put) Jack
For connection to the audio input connector on a TV,
another VCR, or an audio tape recorder.
23 VIDEO OUT(put) Jack
For video output connection to a TV or another VCR.
24 VIDEO lN(put)jack
For video input connection from the output jack of a
portable video camera, another VCR, or another video
source.
X25CH3/CH4 Switch
Set to channel 3 or 4 (whichever is not used for regular
TV broadcasting in your area) to use yoiir TV as a screen
for your VCR. See “Hook Up Your VCR.”
26 RF OUT(put) Jack (out to TV set)
Use the supplied cable to connect this terminal to the
UHFA^HF input terminal on your TV set
27 ANT(enna) IN(put) Jack (in from Antenna)
Connect your antenna or cable to this terminal.
28 TV POWER Button*
Press to turn TV power ON or OFF.
29 MUTE Button *
Press to Instantly reduce the TV’s sound level. Press
again to return to previous setting.
30 VOLUME UP/DOWN Buttons *
Press “ A ” or “ ▼ ” to increase or decrease the TV’s
sound volume.
31 TV CHANNEL UP/DOWN Buttons *
Press “ A ” or “ ▼ ” to scan up or down through the TV
channels. Release at desired channel.
* NOTE: Only applicable for Philips TV.