Philips VR350 - Manual (Page 13)

TO S£1£CT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 INPUT SELECT
5 CLOCK SET
TO END PUSH MENU
Main Menu
TO SELECT PU9i NO. SHOWN
1. NORMAL PUY (ON)
Z REPEAT PUY
3. ON SCREEN MODE
4. LANGUAGE
5. PICTURE
TO END PUSH MENU
VCR Set Up
Button
Pressed Time
' STOP 12.00AM '
CH12-
. SLP M 123 4S
Tape Counter and
Speed Counter Memory
VCR Status Display
’ TO SELECT PUSH NO. SHOWN ' ' ESCOJA PULSANDO NUMERO ’
1. ENGUSH (ON) 1. ENGUSH
Z ESPAÑOL Z ESPAÑOL (SI)
MAKE SELECTION OR ESCOJAO
TO END PU^ MENU USE MENU PARA TERMINAR
Language Selection Menu
OSD Main Menu Screen
Press the MENU button on the remote to display the main menu screen.
Then press the NUMBER button on the remote control for the desired
feature displayed on the menu. When you select a feature, turn to the
section in this manual and read the accompanying instructions.
VCR Status Display
1. Press the MENU button.
2. Next, press the 2 button to select “VCR SET UP.”
3. Then, press the 3 button to select “ON SCREEN MODE.”
4. Now, press the 1,2, or 3 button to select “ON SCREEN ON,”
“COUNTER ONLY” or “ON SCREEN OFR”
“[ON]” appears beside the selection made.
POSITION
ON SCREEN ON: Whenever a function button (Stop, FF, etc.) is pressed,
a 5 second VCR Status Display appears.
COUNTER ONLY: Whenever a fhnction button (Stop, FF, etc.) is pressed,
a 5 second VCR Status Display appears.
After 5 seconds, the counter information will remain on the screen.
ON SCREEN OFF: In this position, there will be no indication when
normal functions are pressed.
OSD Language Select
1. Press the MENU button.
2. Next, press the 2 button to select “VCR SET UP.”
3. Then, press the 4 button to select “LANGUAGE.”
4. Now, press the 1 or 2 button to select “ENGLISH” or “SPANISH.”
All OSD (On-Screen Displays) will appear in the language you select.
“[ON]” will appear beside the selection if you choose English and
“[SI]” will appear if you choose Spanish.
TO SELECT PUSH NO. SHOWN
1. NORMAL FlAY
Z REPEAT PLAY (ON)
3. ON SCREEN MODE
4. LANGUAGE
5 PICTURE
MAKE SELECTION OR
TO ^D PUSH MENU
Repeat Playback Selection
Repeat Playback
1. Press the MENU button.
2. Next, press the 2 button to select “VCR SET UP.”
3. Then, press the 2 button to select “REPEAT PLAY.”
“[ON]” wiU appear beside the selection.
• The PLAY light on the display panel will blink.
• The tape will be played all the way to the end, 20 times automatically
and then stop.
• When the STATUS button is pressed during Repeat Playback, “PLAY”
blinks on the TV screen.
• To stop the tape during Repeat Playback, press STOP.
TO SELECT PUSH NO. SHOWN
1. PICTURE CTL OFF
2. PICTURE CTL ON (ON)
TO END PUSH MENU
Picture Control
Picture Control
To get a better picture when viewing tapes with noise such as rental
tapes.
1. Press the MENU button, and next press the 2 button to select “VCR
SETUP”.
2. Then, press the 6 button to select “PICTURE,” and now press the 2
button to select “PICTURE CTL ON.”