Make sure, Record on a tape 11 – Philips VR350 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Record on a Tape 11

record on a cassette tape, follow steps 1-7 below. Read all the instructions before starting. You must use your

remote control.

Power ON:

Select channel

3or4.

Cassette CHANNEL REC/OTR

Tape UP/DOWN Button

Buttons

Make sure — |--------------------------------------------------

the steps in “Hook Up Your VCR” on pages 7-8 have been
completed.

At the TV

Ihm the TV on. Ihm to channel 3 if the VCR CH3/CH4 switch is

set to “CH3.” Thm to channel 4 if the VCR is set to “CH 4.”

At the VCR

Insert a cassette with the record tab in place.

2 ^ The power will come on.

If the cassette is already in the VCR, press the POWER button.
If the VCR display lights on the VCR, do nothing.
If it isn’t, press the VCR/TV button.

Choose the Tape Speed

(You may skip this step if the desired tape speed is already

I selected.)

Press the Tape SPEED button on the remote control until the desired

tape speed (SP, SLP) appears on the TV screen.

NUMBER
Buttons

PAUSE/

STILL

Button

STOP

Button

Tape

SPEED

Button

VCR
CH(annel)

UP/DOWN
Buttons

REC(orci)
Button

Remote Control

Choose the Channel

i Press the VCR CH(annel) UP/DOWN or NUMBER buttons to

select the chaimel to be recorded.

Start Recording

Press the REC/OTR button.

Pause Recording

I To pause, press the PAUSE/SULL button. To continue recording,

press this button again.

Stop Recording

I To stop, press the STOP button.

Other recording options are available on
pages 14-16,19.

Now, go to the next page and leam how to record one channel while
watching another.