Philips VR350 - Manual (Page 24)

24 Before Requesting Service (cont’d)
-Remote Control-
VCR can’t be remote controlled...
—Miscellaneous-------------------
You can’t view programs nomially on the TV..,
Video cassette can’t be inserted...
Video cassette can’t be removed...
Video cassette ejects when the OTR or RECORD button is
pressed, or when the POWER button is pressed off to set the
Timer...
—Correction--------------------------------
• Aim the Remote Control directly at the remote sensor on
the VCR.
• Avoid aU obstacles which may interfere with the signal
path.
> Inspect or replace the batteries (P.6).
> Make sure batteries are inserted correctly (P.6).
—Correction--------------------------------
• Set the VCR/TV selector to “TV”.
• Insert the cassette with the window side up and the record
tab facing you.
• Make sure a cassette tape is not already inserted. Press
STOPyEJECT button on VCR.
• Check that the power cord is correctly connected to your
VCR’s back panel and to an AC (Alternating Current)
outlet
• If the VCR’s TIMER indicator is lit, press POWER to
disengage the timer first, and then press STOP/EJECT.
• Check the cassette to be sure that the record tab on the
back of the cassette is still intact (P.6).
Specifications
Video Recording System
Video Signal
Antenna
VHP Output Signal
Power Requirement
Power Consumption
Operating Temperature
Relative Humidity
Rotary four-head helical scan
system
EIA standards: NTSC color
VHF/UHF - 75 ohm external
antenna terminal
Channel 3 or 4 (switchable) 75
ohms unbalanced
AC110V-127V-220V'v
50/60 Hz
19W
41'>F(5°C)to 104“F(40°C)
10% to 80%
Weight
Dimensions
Diner
Broadcast Channels
CATV Channels
Accessories
3.8 kg
360(W)
X 94(H) X 295(D) mm
VHF2-13,UHF14-69
Midband A-I
Superband J-W
Hyperband AA - EEE
Lowband A5-A1
Special channel 5A
Ultraband
65-125
• Wireless Remote Control
• “AAA” Batteries
• RF Coaxial Cable
• Conversion plug
Design and specifications are subject to change without notice.