10 play a tape, Play a tape – Philips VR350 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10 Play a Tape
T°
play a tape, follow steps 1 -4 below.
-] Make sure...[
the batteries are loaded in the remote control and the connections on
pages 7 and 8 have been completed before continuing to the steps
below.
At the TV
l 'Rum the TV on. Set the TV to the same channel as the switch on the
' back of the VCR (CH3/CH4).
At the VCR
I
Insert a cassette.*
The VCR Power will come on.
Start Playback
1
Press the PLAY button.
The VCR mode is automatically set. “VCR” indicator will light.
Stop Playback
I Press the STOP/EJECT button to stop playback.
Press the REW(ind) button to fully rewind the tape.
Press the STOP/EJECT button again to remove the tape.
* • If a cassette’s record tab is removed, playback starts
automatically.
• If a cassette is already in the VCR, just press the POWER button.
Now, turn to the next page and learn how to record a 'TV program.