Philips VR800 - Manual (Page 24)

Variant 1, the video recorder is to control
the camera recorder
III
Start copying with the I record / otr • I button on the vid­
eo recorder.
The camera recorder starts 'PLAYBACK' and atthe same
time the video recorder starts 'RECORDING'.
|2i Stop copying with the I stopb I button on the video re­
corder.
m End copying with the IMENUI button.
Variant 2, the camera recorder is to control
the video recorder
III
Start copying with the corresponding button on the
camera recorder.
The camera recorder starts 'PLAYBACK' and atthe same
time the video recorder starts 'RECORDING'.
in Stop copying with the PAUSE or STILL button on the
camera recorder.
m End copying with the IMENUI button.
Setting the 'preroll time'
When the beginning of the recording is missing, the 'preroll
time' was too long. Select a shorter 'preroll time'.
If recording started too early, the 'preroll time' was too short.
Select a longer 'preroll time'. You can select a 'preroll time'
between 1:00 and 5:00 seconds.
m Press the I menui button.
fn Selectthe line 'RECORD FUNCTIONS' with the menu
buttons I PT lor I Pt land confirm with the menu button
[T1 Selectthe line 'RECORD SETTINGS' with the menu
buttons I PT lor I Pt land confirm with the menu button
S-
[T| In line 'PREROLL TIME', adjustthe 'preroll time' with the
menu buttons I -*• lor I I.
You can also directly enter the 'preroll time' with the digit
buttons [Ml.
With the I clear ( cdi button you can reset the 'preroll time'
to that of the identified camera recorder type.
IT] Confirm with the [ ok ] buton.
HI To end, press the IMENUI button.
20