Philips VR800 - Manual (Page 20)

m On the remote control, press the I select I button and the
digit button [2] at the same time to switch the remote
control to 'VCR 2'.
I> If you want to switch back to 'VCR 1, press the I select I
button and the digit button jTlatthe same time.
HI
Confirm with the fokl button.
1>
I>
Continuous playback
111 Press the I menu I button. The main menu appears.
in Selectthe line 'SPECIAL SETTINGS' with the menu
buttons I PI lor I Pt I. Confirm with the menu buton
ra­
il] Select the line 'REPEAT PLAY' with the menu buttons
rmor rpf~|.
Select'ON'with the menu buttons I ■»- lor |->- I. If you
select'OFF', the function will be switched off.
m Confirm with the F ok I button.
m Press the IMEN ui button.
m Inserts cassette and start the continuous playback with
the I PLAY»- 1 playback button.
When the end of the tape orthe end of the recording has
been reached, it rewinds and starts playback again.
The automatic switch-off
If the video recorder is not used for a few minutes in certain
modes (e.g.: STOP), it switches to standby automatically. You
can switch off this automatic switch-off in order to use the
video recorder as a television receiver.
13 Switch on the TV set. If required, selectthe programme
numberforthe video recorder.
m Press the I menu I button. The main menu appears.
m Selectthe line 'SPECIAL SETTINGS' with the menu
buttons I PI lor I Pt land confirm with the menu button
ra­
il] Selectthe line 'AUTO STANDBY' with the menu buttons
iTTior im.
If the menu does not disappear, the video recorder didn't
recognize the remote control command.
Repeat step IT] .
After you changed the batteries in the remote control, it
will switch back to 'VCR 1'.
If you entered the wrong remote control command, the
message e.g.: 'VCR ONLY RESPONDS TO VCR 1 COM­
MANDS' appears on the TV screen or'VCR 1'appears in
the video recorder display, when you press a button for a
few seconds.
HI Select'ON'with the menu buttons I-*- lor | -»- |. If you
select 'OFF', the function will be switched off.
fs] Confirm with the fokl button.
m To end, press the I menu I button.
A TIMER recording only functions when the video
recorder is switched to standby.
The'DEMO^ function_______________________________
When the 'DEMO' function is switched on and the video
recorder switched off, several menus will be demonstrated on
the TV screen. This has no influence on operating the video
recorder.
m Switch on the TV set. If required, selectthe programme
numberforthe video recorder.
HI Press the IMENUI button. The main menu appears.
m Selectthe line 'SPECIAL SETTINGS' with the menu
buttons I PI lor I Pt land confirm with the I-»- I button.
m In the line 'DEMO', select 'ON' with the menu buttons
iraor EH-
If you select 'OFF' the function will be switched off.
HI Confirm with the [ ok ] button.
[e] To end, press the [ menu ] button.
The 'DEMO'function is not possible during a 'TIMER
recording' and during an 'Automatic recording from a
satellite receiver'.
16