Philips VR800 - Manual (Page 22)

Audio only record Audio dubbing
You can use your video recorder as a HiFi tape recorder. You
can record the sound from e.g. a HiFi unit or a second video
recorder.
m Use an audio cable to connectyour HiFi (stereo) unit to
the lAUXiNLRlsocket atthe back of the video recorder.
m Select the programme number from which the 'only
audio' recording should be made, using the I PI I or
I PI [button (e.g.:'AUX'for the lAUXlNLRlsocket.
m Press the I menu ! button. The main menu appears.
m Selectthe line 'RECORD FUNCTIONS' with the menu
buttons I PI lor I Pt land confirm with the I -*• I button.
m Selectthe line 'AUDIO ONLY' with the menu buttons
I PI lor I Pt land confirm with the I -»• I button.
To start sound recording, press the [ recorwo T r W] but­
ton.
m To stop recording, press the I stop » I button.
m To end, press the I menui button.
Manual audio control
With the ( manual I button you can switch to manual audio
control.
m Press the I manual I button on the video recorder. The
current selection appears in the display.
HI Keep pressing the I manual I button until 'MAN' (manual
audio control) appears in the display.
HI With the I PROGRAMMETland I programme TI buttons on
the videorecorder, adjust the recording level so that the
'0 dB' mark lights up during the loudest parts of the
recording.
Atstep[|] you can switch back to'AUTO.'(automatic
audio control) with the menu button I -*■ I.
This function enables you to replace (dub) the sound track of
an existing recording with another sound track. To do this,
connect an audio source (e.g.: a CD-player) to the
I L-AUDio-Rl (programme number 'E3') socket.
m Switch on the TV set. If required, selectthe programme
numberforthe video recorder.
m Press the I menu I button. The main menu appears.
in Selectthe line 'RECORD FUNCTIONS'with the menu
buttons I PI lor I Pt land confirm with the !-»• I button.
m Selectthe line 'AUDIO DUBBING' with the menu buttons
I PI lor I Pt land confirm with the I-» (button.
n Selectthe programme number forthe audio source
(e.g.: 'E3'). Switch on the external audio source.
HI
During playback, locate the position on the tape at which
the audio dubbing is to end.
rn Press the ISTILLN^ I button. 'STILL' appears on the
TV screen.
Press the I clearicu I button. '0:00:00' appears on the
TV screen.
Locate the position at which the audio dubbing is to start,
[iol Press the I stilln ^ (button. 'STILL' appears on the
TV screen.
[tfl Press the I stop » I button.
Press the I RECORD/OTR'yi button. The video recorder will
start to record the sound transmitted from the audio
source. The normal (linear) sound track is re-recorded,
the stereo sound will remain.
The audio recording stops automatically when the
counter reaches '0:00:00'.
|i^ To end audio dubbing,press the I MENUI button.
To play back the audio dubbing, read the section 'Sound
track selection' in chapter 5, 'ADDITIONAL FUNCTIONS'.
18