Philips FW-M55 - Manual (Page 32)

$
TIMER
4 Press N or H on the system to set
the minute for the timer to start.
5 Press CLOCK/TIMER to store the
start time.
-* The timer is now set.
The TIMER remains on the display.
• At the preset time, the timer will be
activated.
The selected source will be
played.
Notes:
- During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
- If the source selected is TUNER, the
last tuned frequency will be switched
on.
- If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the disc
trays are empty, TUNER will be
selected instead.
- If the source selected is TAPE, and if
the preset time is reached during high
speed dubbing, the TUNER will be
selected instead.
- The timer will not activate if a recording
is in progress.
To switch off the TIMER
1 Press and hold CLOCK/TIMER for
more than two seconds.
2 Press ■ on the system to cancel the
timer
— The timer is now switched off.
The display will show "0
the TIMER disappears.
and
To start the TIMER again (for the
same preset time and source)
1 Press and hold CLOCK/TIMER for
more than two seconds.
2 Press CLOCK/TIMER again to
store the start time.
— The timer is now on.
— The TIMER appears on the display.
SLEEPTIMER
Sl©ep Timer (only on remote
control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
— The selections are as follows (time
in minutes);
.XX” or“ " w i l l be
" X X " is the time in displayed,
minutes.
When you reach the desired length
of time, stop pressing the SLEEP
button.
After this amount of time passes,
the system will switch to the
standby mode.
To switch off the Sleep Timer
• Press SLEEP repeatedly until "0
is displayed, or press the
STANDBY ON button