Philips FW-M55 - Manual (Page 29)

RECORDING
Notes:
- It is not possible to change tape side
during recording.
- For recording, use only tape of lEC type
I (normal tape) or lEC type II (Cr02).
- The tape Is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
- The recording level is set automatically,
regardless of the position of Volume,
DBB, INCREDIBLE SURROUND or
DSC.
- To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect
- If E" is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the CrOj tape
detection hole when covering the tab
opening.
Recording from other
sources
(only on tape deck 2)
1 Press TAPE (TAPE 1 * 2 ) to select
tape deck 2.
2 Load a blank tape into tape deck 2
with the open side downward.
3 Press M or ►! to select the
recording tape side (see Tape Side
under TAPE section).
4 Press CD, TUNER or AUX
• Start playback of the selected source.
5 Press REC to start recording.
The REC starts flashing.
6 Press ■ to stop recording.
Notes:
- Only H or ZD mode is available
during recording.
- During recording, it is not possible to
listen to another source.