Philips FW-M55 - Manual (Page 22)

for CD/MP3-CD.. .to program disc
tracks.
forTUNER ...to program preset
radio stations.
waveDand : rri or Ai'^l.
TAPE / (TAPE 1* 2)
to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
demonstration mooe.
PLAY ► / PAUSE II
for CD/MP3-CD.. .to start or
interrupt playback.
forTAPE........... to start playback.
|22| l#\rc I
m OPEN
- to open tape deck 1.
MUTE
- to switch off the sound temporarily.
O
CD/MP3-CD
Warning!
1) This system is designed for conventional discs. Do not use any
accessories such as disc stabilizer rings or disc treatment sheets, etc.,
which may damage the disc mechanism.
2) Do not load more than one disc into each tray.
3) When the disc changer is loaded with discs, do not turn over or shake the
system.This may jam the changer.
You may load three discs in the disc changer for continuous playback
without interruption.
Discs for playback
This system can playback all audio CD,
finalized audio CD-Recorder and MP3-
CD format discs.
. - . . . O . . n C Q M P A C T
fifigrl [o]DSi
UiJUcJUD DIGITAL AUDIO
Recordable DIGITAL AUDIO
Note:
- For mixed mode discs, only one mode
will be selected for playback depending
on the recording format.
Loading the Disc Changer
1 Press CD to select CD/MP3-CD
mode.
2 Press OPEN'CLOSE
The disc carousel tray slides out.
3 Load a disc with the printed side up
in the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the
DISC CHANGE button
The disc carousel tray will rotate
until the empty tray is ready for
loading.
— Playback will always start with the
disc in the inner disc tray.
4 Press OPEN'CLOSE to close the
disc carousel tray.
The total number of tracks and
the playing time of the last
selected disc appear on the
For MP3-CD only:
The first Album and the first Title
information appear on the display.
Notes:
- To ensure good system performance,
wait until the disc changer completely
reads the disc before proceeding.
- ForMP3-CD, fhe disc reading time may
exceed 10 seconds due to the large
number of songs compiled into one
disc.
Disc Direct Play
You can play a disc directly by pressing
the DISC 1, DISC 2 or DISC 3
button.
Playing a normal disc
1 Press PLAY ►!! to start playback.
— The disc tray, track number and
elapsed playing time of the current
track appear on the display.
• To interrupt playback, press
PAUSE ►!!
The playing time flashes.
• To resume playback, press
PLAY ►!! again.
2 To stop playback, press ■ .
Note:
- During Disc Reading mode. If you press
any button, 'PLEI- i SE W R I T " will be
displayed.