Philips FW-M55 - Manual (Page 19)

LM
—' ©
CONTROLS OPERATING THE SYSTEM
ALBUM -/+
to select previous/next Album for
MP3-CD only.
DISPLAY (ALBUM)
to view MP3-CD Album.
REPEAT
to repeat a disc track or the
current disc.
DISPLAY (TITLE)
to view MP3-CD Title.
TITLE -/ +
to select previous/nextTitle for
MP3-CD only.
SLEEP
to switch the system to standby
mode at a selected time.
DIGIT 0-9
(numbers consisting more than two
figures must be keyed in within 2
seconds.)
for CD/MP3-CD,.,to key in a disc
track for playback or
programming.
.......................... to select another
track during playback.
(!)
to switch the system to standby
mode.
Notes for remote control:
— First select the source you wish
to control by pressing one of the
source select keys on the remote
control (e.g. CD,TUNER, etc.).
- Then select the desired function
( ►, M, H, etc.).
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
- During the demonstration, if you press
any source (or standbymn) button, the
system will switch to the respective
mode (or standby).
- When the system is switched to
standby mode, the demonstration will
To stop the demonstration mode
♦ Press and hold ■ (on the system
only) for five seconds when the
system is in demonstration mode.
The demonstration will stop.
— "Utnu U M - " is displayed.
The system will switch to standby
mode.
Notes:
- When the system Is switched on from
the main power outlet, the disc
carousel tray may open and dose
again to initialize the set
- Even though the AC power cord is
removed from and reconnected to the
wall socket the demonstration will
remain off until it is switched on again.