Voice control, Security features, Cleaning terminal – FingerTec i-Kiosk 100 Manual User Manual
Page 7: Restarting and resetting
7
Voice Control
Voice Control lets you control the level of volume emitted by the i-Kiosk 100.
Turn On/Off :
The system lets you to turn on/off the voice based on your preference.
Press Menu > System Icon > System > Voice Prompts > On/Off >Save.
Adjust Volume:
The default volume of the i-Kiosk 100’s voice is Medium. The
volume has 3 settings: Low, Medium and High. To sustain the performance of the
speaker, it is recommended to set the volume at Medium. To adjust the volume Press
Menu > System Icon > System > Adj VOL (low/med/high) > Save.
Security Features
Security features help protect the information in the terminal from being accessed
by others.
Admin Affi
rm:
Register an administrator to the system by enrolling a fingerprint or
password to a user ID. Press Menu > User > New User > Auth: Administrator > Choose
enrollment method > Save. After enrolling an administrator, the main menu can only
be accessed by the administrator.
Cleaning Terminal
To clean the i-Kiosk 100, you need to turn off the terminal
Clean Touch Panel:
Use a dry cloth to clean the terminal. Do not use any liquids,
household cleaners, aerosol spray, solvents, alcohol, ammonia and abrasive solu-
tions to clean the terminal because it could damage the surface of the terminal-
Clean Fingerprint Scanner:
Clean the fingerprint scanner with a microfiber cloth.
Restarting and Resetting
If something isn’t working right, try restarting or resetting i-Kiosk 100.
Restarting the Terminal:
Push the On/Off button on the terminal to restart the
i-Kiosk 100. If you can’t restart the i-Kiosk 100, or if the problem persists, you might
want to reset the terminal instead.
Resetting the Terminal:
Go to Menu, select System and select Reset. Press Yes to
confirm. Resetting the terminal will cause all your settings to return to the original
factory settings.