Checking the genuine tcms v2, Installation and setup of tcms v2, Access connection – FingerTec i-Kiosk 100 Manual User Manual
Page 15: Bell port
15
NOTE
Link all cables to the correct connection point(s) before attempting to connect the
terminals to software.
Certificate of
Authenticity
2008-2009 HRM System All right reserved.
c
FingerTec TCMS v2
Product Key:
YTR1-4AWE-9899
S/N: 8203602 Activation Key: K2EWF5SZ
001010
ACCESS CONNECTION
Linking the terminal to door lock system.
BELL PORT
Linking the terminal to doorbell.
Checking the Genuine TCMS V2
TCMS V2 is a genuine software by FingerTec. Check the genuine sticker the TCMS
V2 software on the FingerTec DVD cover to retrieve product and activation code.
The serial number of the terminal must match the serial number printed on the
sticker in order to activate the system.
Installation and Setup of TCMS V2
Install the TCMS in a PC with sufficient minimum requirements. Refer to
user.fin-
gertec.com/user-promanual.htm
for TCMS V2 Manual online. Setup Wizard will
require the product key and activation code to activate the system. In case you
lose the TCMS V2 product key and activation code, go to
user.fingertec.com/re-
trieve_key_user.php
for retrieval.