Canon MF5770 - Manual (Page 58)

8-5
Machine Settin
gs
8
4. TIME OUT Enables/disables automatic scanning of documents
after the fax number is entered.
ON Scanning begins automatically in 5 or 10 seconds after
you enter the fax number.
OFF Press [Start] to scan document. Otherwise, AUTO
CLEAR function activates and the LCD returns to
standby display after 1 minute. (See Chapter 10,
"Machine Settings," in the User's Guide.)
5. RX SETTINGS Sets the reception functions.
1. ECM RX The ECM (Error Correction Mode) reception is turned
on or off.
ON All receptions are conducted with ECM if the other
party's fax supports ECM.
OFF ECM is turned off.
2. FAX/TEL OPT. SET If you select as the receive mode, customizes
its settings.
1. RING START TIME Selects the time the machine takes to check whether a
call is a fax or voice call.
0SEC to 30SEC (8SEC)
2. F/T RING TIME Selects the ring length for voice calls.
15SEC to 300SEC (22SEC)
3. F/T SWITCH ACTION Selects whether the machine switches to receive mode
after the ring time has elapsed, or whether if
disconnects the call.
RECEIVE, DISCONNECT
3. INCOMING RING Sets whether the telephone rings when it receives a
voice call, enabling you to answer the call. This function
is only available when the fax receive mode is set to
.
OFF The telephone does not ring when it receives a voice
call.
ON The telephone rings when it receives a voice call if a
telephone is connected.
RING COUNT Sets the number of incoming rings. The telephone will
be disconnected after the specified times.
1TIMES to 99TIMES (2TIMES)
Name Descriptions