Canon MF5770 - Manual (Page 17)

3-3
Speed
Dia
ling
3
■ Deleting an Entire Entry
Follow steps 1 to 4 of "Registering One-Touch Speed Dialing" (see p. 3-1). In step 5, press and hold [Clear] to
delete the registered number
➞ press [OK] ➞ [Stop/Reset].
NOTE
•
When deleting the registered number, the registered name is cleared automatically.
•
You can also press [ (-)] or [Clear] repeatedly to delete the registered number.
Registering Coded Speed Dialing
Before you can use coded speed dialing (see "Coded Speed Dialing," on p. 4-5), you need to register
the recipients' fax/telephone numbers. You can register up to 100 fax/telephone numbers.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select ➞ press [OK].
3
Press [ (-)] or [ (+)] to select ➞ press [OK].
4
Press [ (-)] or [ (+)] to select a coded speed dialing code (00 to 99) ➞ press [OK] twice.
You can also select a code by pressing [Coded Dial] ➞ entering the two-digit code with the numeric keys.
5
Use the numeric keys to enter the fax/telephone number you want to register (max. 120 digits, including
spaces and pauses)
➞ press [OK] twice.
6
Use the numeric keys to enter a name for the coded speed dialing code (max. 16 characters, including
spaces)
➞ press [OK].
To continue registering coded speed dialing codes, repeat the procedure from step 4.
7
Press [Stop/Reset] to return to the standby display.
T E L N U M B E R E N T R Y
1 4 9 x x x x x x x
➞
N A M E : A
N A M E : A
C a n o n I T A L I A C O D E D S P D D I A L
[
∗ 0 0 ] C a n o n I T A L I A
➞