Eliminator Lighting Electro Strip User Manual

Page 2

SdAd -

Universal DMX Control - DMX Address Setting.

This unit allows you to use any univer-

sal DMX-512 controller to LED color and the shutter (strobe). A DMX controller allows you to create unique

programs tailored to your individual needs. Follow the set-up specifications that are included with your DMX

controller.
1. When “SYS” is displayed, press the ENTER button so that “SdAd” is displayed, then press ENTER again.
2. The current address should be displayed. Use the UP or DOWN buttons to find your desired address. Press

ENTER to set your desired DMX address. Now connect your DMX Controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
5. For help operating in DMX mode consult the manual included with your DMX controller.

A000 -

in this mode you can choose one of 23 working modes; 7 static colors with flash, 6

color change modes with adjustable change speed, 7 chase sequences with adjustable chase

speed, adjust able RGB mode, color fade mode with adjustable fade speed, and sound active

mode. The next few sections will detail the working modes.

1. Press the MENU button until you are at the beginning of the system menu. You will know you are at the

beginning when “SYS” is displayed. If “SYS” is displayed press either the UP or DOWN button so that “ACt”

is displayed. When “ACt” is displayed press ENTER. “AXXX” will be displayed, “XXX” represents the displayed

mode.
2. Now using the UP and DOWN buttons scroll through the various programs. See the next four sections for

detailed descriptions of the various working modes. To exit from a mode press the MODE button.

A001 - A007 -

there are 7 static colors that can be projected. Flash (strobe) can be added to

your desired color.

1. Once you have followed the directions listed under section “A000” you can now select and run different

programs.
2. A001 - A007 are your static color modes. Each number 1-7 represents a different color.
3. Press the UP and DOWN buttons to scroll through the different colors. Once you have found your desired

color just leave the setting as is. If you would like to add strobing to the color press ENTER, “F.000” will be

displayed. Press the UP or DOWN buttons to adjust the strobing speed. Once you have found your desired

speed press the MODE button once to go back to your color mode. To exit the running modes completely

press the MODE button twice.

A008 - A013 -

there are 6 color changing programs to choose from. The speed of the color

change is adjustable in all 6 programs. Flash (strobe) can be added to programs A008 - A011.

1. Once you have followed the directions listed under section “A000” you can now select and run different

color changing programs.
2. A008 - A013 are your color changing programs. Each number 8-13 represents a different color changing

program.
3. Press the UP and DOWN buttons to scroll through the different programs. Once you have found your

desired program press ENTER. “P.XXX” will be displayed, this is program speed adjustment. Use the UP or

DOWN buttons to adjust the speed of the color change. Once you have found your desired color change

speed you can leave the unit as is or press MODE so that your selected program number is displayed. This

mode can also be run by sound activity, adjust the sensitivity knob located on the rear to make the unit more

senstive or less sensitive to sound. Turning the knob clockwise makes it the more sensitive, counter-clockwis

makes it less sensitive.