Eliminator Lighting TriDisc 9 LED - Manual (Page 3)

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
the sound sensitivity adjustment menu. Use the UP or DOWN buttons to adjust the sound sensitvity to your
desire. The sound sensitivity is betweent 0 (least sensitive) to 99 (most sensitive). Press ENTER when you
have found your desired program speed. The Sound Active programs are listed below:
Pr.01 - Color Change & Color Change Gradually
Pr.02 - Color Change
Pr.03 - Color Change Gradually
nan (Manual Programs): In this menu you can activate 1 of 8 Programs. Using the UP or DOWN buttons,
scroll to “nan” and press ENTER. “CH.0X” will be displayed, with “X” representing the current program num-
ber. Use the UP or DOWN buttons to scroll through the 8 different programs. Once you have found your de-
sired program press ENTER. When you press ENTER, “XXX” will be displayed. This is the adjustment menu.
Use the UP or DOWN buttons to adjust the different features to your desire. Once you have finished making
your adjustments press ENTER. The manual programs and their adjustments are listed below:
CH.01 - Red
Adjustment - Intenstiy 0% - 100%
CH.02 - Green
Adjustment - Intenstiy 0% - 100%
CH.03 - Blue
Adjustment - Intenstiy 0% - 100%
CH.04 - RGB
Adjustment - Intenstiy 0% - 100%
CH.05 - Color Change
Adjustment - Colors (as you adjust the setting colors will change until you find your desired color)
CH.06 - Auto Effect
Adjustment - Effect running speed 0 (slowest) - 255 (fastest)
CH.07 - Sound Active
Adjustment - Sound Sensitivity 0 (least sensitive) - 255 (most sensitive)
CH.08 - Strobe
Adjustment - Strobe speed 0 (slowest) - 255 (fastest)
deFA (Reset): In this menu you can activate reset function. Using the UP or DOWN buttons scroll to “deFA”
and press ENTER.