Canon FAX-JX210P - Manual (Page 9)

8 Introduction
„ Selecting the Language for the LCD
If an unintended language is displayed on the LCD, change it into your desired language
following the procedure below.
1
Press [Menu].
2
Press [}] once, then press [Start/Copy].
3
Press [}] five times, then press [Start/Copy].
4
Press [}] twice, then press [Start/Copy].
The currently selected language name is displayed in the language itself.
5
Press [}] once, then press [Start/Copy].
Each time you press [}], the display cycles through:
, , , , , ,
, , , , , ,
, , , , and .
6
If your desired language is displayed, press [Stop/Reset].
Setting ends and the fax returns to standby mode.
If your desired language is not displayed, press [{] once, press [Start/Copy], then repeat
from step 5 again.