Canon FAX-JX210P - Manual (Page 20)

19 Before Using Your Machine
Registering Coded Speed Dialing Numbers and
Names
Use coded speed dialing to dial a fax number at the press of three buttons. A fax/telephone number
can be registered under each two-digit speed dialing code and you can register up to 60 locations.
You can also register the name of the party the name appears on the printout of the CODED SPEED
DIAL TELEPHONE NO. LIST.
1
Press [Menu].
2
Use [{] or [}] to select , then press [Start/Copy]. The LCD
displays <1-TOUCH SPD DIAL>.
3
Use [{] or [}] to select , then press [Start/Copy]. The
LCD displays < 00=>.
4
Use [{] or [}] to select the two-digit code (00-59) under which you want to register
the number, then press [Start/Copy] twice.
If a number is already registered under this coded speed dialing code, the number is
displayed on the LCD.
5
Enter the party’s number and name the same way you registered them for one-
touch speed dialing.
See steps 5 to 6, “Registering One-touch Speed Dialing Numbers and Names” on page 18.
6
To assign additional coded speed dialing numbers, repeat from step 4.
To finish, press [Stop/Reset].
Note
It is recommended to print out a copy of the CODED SPEED DIAL TELEPHONE NO. LIST and keep it for
reference.
See “Activity Reports” on page 48 for details on printing the list.
Note
To delete the name and number registered under the coded speed dialing code, press [Clear] and
[Start/Copy] after you perform steps 1 to 4.
TEL=250xxx_