Canon FAX-JX210P - Manual (Page 31)

30 Sending Faxes
4
Use [{] or [}] to select , then press [Start/Copy]. The LCD
displays .
z To disable automatic redialing, use [{] or [}] to select , then press [Start/Copy].
Press [Stop/Reset] to return to standby mode.
z To enable automatic redialing, use [{] or [}] to select and continue with the steps
below.
5
Press [Start/Copy] twice. The LCD displays <2TIMES>.
6
Use the numeric buttons, or [{] or [}] to enter the number of times you want the
fax to redial, then press [Start/Copy] twice. The LCD displays <2MIN.>.
7
Use the numeric buttons, or [{] or [}] to enter the time interval between redialing
attempts, then press [Start/Copy].
8
Press [Stop/Reset].
The fax returns to standby mode.
Delayed Sending
Your fax can send a document automatically at a preset time. This allows you to take advantage of
lower late-night long-distance rates offered by some telephone companies.
The fax can only register one preset sending operation at a time.
1
Load the document face up into the ADF.
See “Loading Documents and Paper” on page 22.
You can set the scanning resolution and contrast (see page 25).
2
Press [Menu].
3
Use [{] or [}] to select , then press [Start/Copy].
4
Use [{] or [}] to select , then press [Start/Copy].
5
Enter the desired sending time (in 24-hour clock format) using the numeric buttons.
z Precede single digits with a zero.
z Press [Clear] if you need to re-enter the time.
z You can also use [[] or []] to move the cursor.
6
Press [Start/Copy].
7
Enter the receiving party’s fax number.
z You can enter the receiving party’s fax number by using the numeric buttons, one-touch
speed dialing, coded speed dialing, or directory dialing (see page 26).
z If you use the numeric buttons, press [Start/Copy] after entering the number to register it.
SET TIME 15:00