Canon FAX-JX210P - Manual (Page 35)

34 Receiving Faxes
Setting the Receive Mode
Once you have decided which mode is suitable for your needs, set the mode by pressing [Receive
Mode/Resolution].
1
Press [Receive Mode/Resolution].
Every time you press [Receive Mode/Resolution], the mode changes cyclically.
„ Receiving Faxes:
„ Receiving Both Documents and Telephone Calls Automatically: Tel Mode>
If you set , you can control precisely how the fax handles incoming calls by
adjusting the following settings:
z
Adjust the time the fax takes to check whether a call is from a fax machine or a telephone
( setting).
z Adjust the length of time the fax rings when the call is a voice call (
setting).
z Set whether the fax switches to receive mode after the ring time set in has
elapsed ( setting).
1
Press [Menu].
2
Use [{] or [}] to select , then press [Start/Copy]. The
LCD displays .
3
Use [{] or [}] to select , then press [Start/Copy]. The LCD
displays .
4
Use [{] or [}] to select , then press [Start/Copy]. The LCD
displays .
5
Press [Start/Copy].
6
Use the numeric buttons, or [{] or [}] to enter the time the fax waits before ringing
when it receives a call, then press [Start/Copy] twice.
7
Use the numeric buttons, or [{] or [}] to enter the time the fax rings while waiting
for someone to pick up the Handset, then press [Start/Copy] twice. The LCD
displays .
Note
z If paper jams, see “Troubleshooting” on page 60.
z If the Ink Lamp lights up faxes will be received to memory.
8SEC
22SEC