Digilent MX3cK - Manual (Page 4)

Cerebot MX3cK Reference Manual
www.digilentinc.com page 4 of 23
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
• Use the “Programmer.Select Programmer”
menu to select the “PICkit3” or other
hardware programming tool being used
.
• Use the “File Import…” dialog box to
navigate to and select the boot loader
programming downloaded from the Digilent
web site. The file name will be something
like: chipKIT_Bootloader_MX3ck.hex
• Use the “Programmer.Program” command to
program all memories on the device.
Additional Reference Documentation
For additional information about the Cerebot
MX3cK board and the use and operation of the
PIC32MX320F128H microcontroller, refer to
the following documents in addition to this
reference manual.
The Cerebot MX3cK Schematic, available on
the Cerebot MX3cK product page on the
Digilent web site:
www.digilentinc.com
The PIC32MX3XX/4XX Family Data Sheet and
the PIC32MX Family Reference Manual
available from the Microchip web site:
www.microchip.com
Additional reference material for the chipKIT
MPIDE system is included in the MPIDE
software download, and on-line in the chipKIT
wiki. Help with questions and problems using
the board with the chipKIT MPIDE software
can also be obtained in the chipKIT forums:
www.github.com/chipKIT32 (software
download)
www.chipKIT.org/wiki
www.chipKIT.org/forum