Digilent 410-308P - Manual (Page 9)

JTAG-SMT2-NC Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 9 of 14
Supported Target Devices
The JTAG-SMT2-NC is capable of targeting the following Xilinx devices:

Xilinx FPGAs

Xilinx Zynq-7000

Xilinx CoolRunner™/CoolRunner-II CPLDs

Xilinx Platform Flash ISP configuration PROMs

Select third-party SPI PROMs

Select third-party BPI PROMs
The following devices cannot be targeted by the JTAG-SMT2-NC:

Xilinx 9500/9500XL CPLDs

Xilinx 1700 and 18V00 ISP configuration PROMs

Xilinx FPGA eFUSE programming
Remote device configuration is not supported for the JTAG-SMT2-NC when used with Xilinx’s iMPACT software.
Note: Please see the "Introduction to Indirect Programming – SPI or BPI Flash Memory" help topic in iMPACT for a
list of supported FPGA/PROM combinations.
Note: Please see the “Configuration Memory Support” section of Xilinx UG908 for a list of the FPGA/PROM
combinations that Vivado supports.