Table 5. rocketmodem country codes, Using dialers, Rocketmodem: dialer file entries – Comtrol SCO OpenServer User Manual
Page 24

24
Using Dialers
SCO OpenServer
Using Dialers
For dialing, both CU and UUCP use a dialer defined by an entry in
/usr/lib/uucp/Devices. The dialer can be:
•
an entry in the /usr/lib/uucp/Dialers file
•
a symbolic link to atdialer, together with a suitable configuration
file in /usr/lib/uucp/default
•
a standalone program such as /usr/lib/uucp/dialRCKT
Comtrol provides the necessary dialer files for each of these types of
dialers to support the RocketModem. These files are included with SCO
OpenServer driver v2.02 and above. For more information, see your
SCO manual or manpages for atdialer(C), dialers(F), Devices(F), and
make.dialer(C).
RocketModem: Dialer file entries
During installation of the driver, the following RcktModem entries are
added to the /usr/lib/uucp/Dialers file.
RcktModem =,-, “” AT&F&S1s0=1\r\c OK\r AT*NC##Z\r\c OK\r
ATDT\T\r\c Speed
&RcktModem =,-, “” +++\dATQ0H OK\r AT*NC##Z\r\c OK\r
ATE0&D2 OK\r ATS0=1Q1\r
Where ## is the code number for the country where the modem will be
used. Values are:
To use the RcktModem dialer file entry, change the fifth field of the
/usr/lib/uucp/Devices file to read:
ACU ttyr0A - 38400 RcktModem
Table 5. RocketModem Country Codes
Code
Country
05
France
06
Germany
08
Italy
14
Sweden
16
United Kingdom
22
USA/North America