Disable the port you want to work with, To enable rs-485 on a port, enter this command, Repeat these steps for each port you want to en – Comtrol SCO OpenServer User Manual
Page 21: Edit the /comtrol/rckt/rs485.cfg file to add or, Reboot the system, or execute /comtrol/rckt/rs4, Rs-485 configuration, Rs485 rs485.init
Disable the port you want to work with, To enable rs-485 on a port, enter this command, Repeat these steps for each port you want to en | Edit the /comtrol/rckt/rs485.cfg file to add or, Reboot the system, or execute /comtrol/rckt/rs4, Rs-485 configuration, Rs485 rs485.init | Comtrol SCO OpenServer User Manual | Page 21 / 42