Configuring non-plug and play devices, Installing non-plug and play devices – Comtrol Multiport Modems Windows XP User Manual
Page 25
Configuring Non-Plug and Play Devices
25
Configuring Non-Plug and Play Devices
After installing the hardware and driver for Windows XP, you can use this
discussion to configure non-plug and play modem COM ports.
Note: RocketModem models install automatically because they are plug and play
devices. Other plug and play modems will install automatically.
Installing Non-Plug and Play Devices
Use the following procedure to install non-plug and play devices.
1.
If you have not so yet, connect the device to a RocketPort port and turn on the
device.
2.
Open the Control Panel.
3.
Go to the appropriate subsection to install non-plug and play modems or
printers:
•
•