Comtrol Multiport Modems Windows XP - Manual (Page 18)

18 Installing the Device Driver
Found New Hardware Wizard Installation (Driver Not Found)
10. Select the Finish button and refer to the appropriate product.
RocketPort:
The new driver is now
installed and the
system will start to
configure the default
COM Ports. When it
is done, you may need
to use the following
subsections to
configure the adapter
for your environment.
• Configuring
Device Properties
(Comtrol
Adapters)
on Page
20
• Configuring Port
Properties
on
Page 21
RocketModem:
The new driver is now
installed and the
system will start to
configure the default
modem ports.
Windows XP notifies
you of these actions in
the lower right hand
side of the screen.
When it is done, you
may need to use the
following subsections
to configure the
RocketModem for
your environment.
• Configuring
Device Properties
(Comtrol
Adapters)
on Page
20
• Configuring Port Properties on Page 21
• To use this modem or modems with RRAS, see the RRAS Configuration
Overview for Windows XP document, which can be located in the RRAS_Doc
subdirectory.
11. Connect the serial devices to the ports. If the device is a plug and play device,
Windows XP will automatically detect and install the driver or drivers for your
devices.
If the device connected to the RocketPort serial ports is not a plug and play
device, see
Configuring Non-Plug and Play Devices on Page 25.