Comtrol ES8510-XTE - Manual (Page 147)

RocketLinx ES8510-XTE User Guide: 2000574 Rev. C Port Configuration (CLI) - 147
Configuration Using the Command Line Interface (CLI)
Port Trunking
LACP
Switch(config)# lacp group 1 fa1
Group 1 based on LACP(IEEE 802.3ad) is enabled!
Note: The interface list is fa8-10. Ports with a different speeds cannot be aggregated together.
Static Trunk
Switch(config)# trunk group 2 fa6-7
Trunk group 2 enable ok!
Display –
LACP
Switch# show lacp internal
LACP group 1 internal information:
LACP Port Admin Oper Port
Port Priority Key Key State
----- ----------- -------- -------- -------
8 1 8 8 0x45
9 1 9 9 0x45
10 1 10 10 0x45
LACP group 2 is inactive
LACP group 3 is inactive
LACP group 4 is inactive
Display –
Trunk
Switch# show trunk group 1
FLAGS: I -> Individual P -> In channel
D -> Port Down
Trunk Group
GroupID Protocol Ports
--------+---------+------------------------------------
1 LACP 8(D) 9(D) 10(D)
Switch# show trunk group 2
FLAGS: I -> Individual P -> In channel
D -> Port Down
Trunk Group
GroupID Protocol Ports
--------+---------+------------------------------------
2 Static 6(D) 7(P)
Switch#