JVC CA-V605T - Manual (Page 36)

USING THE TIMER
Setting the Daily Timer
With Daily Timer, you can wake up to music or your favorite
radio program. You can set Daily Timer whether the System
is turned on or off.
Operation
1. Press the TIMER button once.
DAILY will start to blink on the display.
2. Press TIMER once more to set the Dally Timer. The ON
TIME and hour spaces will start to blink. Use the \«/
►w PREV/NEXT buttons to forward or reverse the
hours, and press SET.
3. Use the PREV/NEXT buttons again to set the
minutes, and press the SET button again.
4. The OFF TIME and hour spaces will start to blink. Set
the OFF TIME the same way you set the ON TIME.
5. After you set the minutes of the OFF TIME, “SOURCE”
will appear on the screen. Press the PREV/
NEXT button to select the source you wish to use.
To select a source, press the PREV/NEXT
buttons and different sources wil blink In the display.
When the source you want to use is blinking press the
SET button.
CD:
When you choose CD as a source “DISC will
appear in the display. To choose other discs use
the ^<◄/►►^ PREV/NEXT buttons. When the cor­
rect disc is displayed press the SET button.
Next “TRACK —’’ will appear in the display. Use
the [◄◄/►►! PREV/NEXT buttons to choose the
track you want to start from.
Next, “VOLUME” will appear In the screen. Use the
!◄◄/►►) PREV/NEXT buttons to choose the vol­
ume you want. Now “TIMER OK” will appear in the
display and the timer is set.
TAPE: When you choose tape as a source, “VOLUME” will
appear in the display. Adjust the volume with the
PREV/NEXT buttons. Now “TIMER OK”
will appear in the display. (If tapes are in both decks
when the timer comes on the System will play deck
B first.)
FM or AM: When you choose FM or AM as a source,
“VOLUME” will appear in the display. Adjust the
volume with the ^◄◄/►►^ PREV/NEXT buttons and
press SET. Now “TIMER OK” will appear in the
display.
To change the source or time for Daily Timer, press the
TIMER button and then press it again and “ON TIME” and
the time will start to blink. Now you can reset the timer and
source.
To cancel the Daily Timer, press the TIMER button and
then press the STOP/CANCEL button while “DAILY" is
blinking on the display.
To turn the Daily Timer back on, press the TIMER button
and then press the SET button while “DAILY” is blinking on
the display.
Note
* If there is a power failure
The clock loses the setting and the display shows “0:00.”
You need to reset the clock.
Setting the Sleep Timer___________
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
Operation
1. Press SLEEP on the remote control.
The SLEEP indicator starts blinking in the display. Each
time you preset the button, the time length changes as
follows:
------------------------- »
10
->
20
^
30
^
60^90 ^120
--------------------------------------------------------------
Canceled ■
2. Wait for about 6 seconds after specifying the time
length.
The SLEEP indicator stops blinking and remains lit.
To check the remaining time until the timer-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the timer-off time, press SLEEP repeatedly until
the desired time length appears in the display.
To cancel the Sleep Timer, press SLEEP repeatedly so that
the SLEEP indicator goes off in the display or turn off the
System.
Note
The System automatically turns off after the specified time
length passes.
Page 32