JVC CA-V605T - Manual (Page 34)

USING THE MICROPHONE
You can use the microphone (not supplied) for two kinds of
recording.
Microphone mixing______________
You can record sound through the microphone by mixing
sound from other sources.
When recording on deck B, you cannot use deck A as the
playing source. (But you can use deck A as the playing source
when recording on the connected VCR.)
Operation
1. Turn down MIC LEVEL fully.
2. Connect the microphone (not supplied) into the MIC
jack on the front panel.
3. Play the source — a CD, a tape, and others.
4. Turn MIC LEVEL and VOLUME to adjust the micro­
phone level and the sound output level.
5. Sing into the microphone.
6. Start recording.
You can record using both deck B and the connected VCR.
When recording on deck B, see “Recording Tapes” on
page 23.
When recording on the VCR, refer to the manual supplied
for it.
Recording oniy though the micro­
phone________________________
You can record sound picked up by the microphone only.
See page 23 to prepare for recording.
Operation
1. Turn down MIC LEVEL fully.
Connect the microphone (not supplied) into the MIC
jack on the front panel.
Turn MIC LEVEL and VOLUME to adjust the micro­
phone level and the sound output level.
Press the REC START/STOP button, the indicator turns
red and recording will start.
2 .
3.
5.
(Front panel)
Sing into the microphone or pick up sound using the
microphone.
Notes
• You can record using both deck B and the connected MD.
• To prevent howling and squealing when using the
microphone
Adjust MIC LEVEL and VOLUME, and try not to point the
microphone at the speakers.
• When you are not going to use the microphone
Keep MIC LEVEL set to MIN, and disconnect the micro­
phone.
Page 30