JVC CA-V605T - Manual (Page 16)

BASIC OPERATIONS
Now you can play a
variety of CDs!!
Triple disc tray usage
Up to three (3) discs can be loaded in the System, You may
insert a disc into any of the disc trays 1 through 3 whichever
you prefer.
If you want to play only a specified disc, press the correspond­
ing disc 1,2 or, 3 button located to the right of the ± (OPEN/
CLOSE) button.
When three discs are inserted, basic order of playing is as
following.
• Pressing DISC 1; DISC 1 — DISC 2 — DISC 3 — STOP
• Pressing DISC 2: DISC 2
- DISC 3 - DISC 1 -» STOP
• Pressing DISC 3: DISC 3 -* DISC 1 — DISC 2 -* STOP
I 0 |^»^°(^
I 0 I
Preparation for playing
The CA-V605T is equipped with an ONE TOUCH easy-on
feature that lets you turn the System on with one easy touch.
Just press the button of the source you want to play and it will
start to play.
Inserting/removing the disc(s)_____
Press the ± (OPEN/CLOSE) button (1 through 3) to open
the disc tray. Then place the disc in the round recess of the
tray with the label side up. To close the tray, press the A
(OPEN/CLOSE) button again.
If you press the A (OPEN/CLOSE) button of the playing disc,
the player stops and then opens the tray.
If you press the A (OPEN/CLOSE) button of a disc that is not
being played, you can change discs without stopping play.
[ © II °'*°(
3
))
[ 0 I I ama (g) ]
[
Note
When loading a disc in the disc tray, be sure to position the
disc inside the recess. Otherwise, the disc will be damaged
when the disc tray is closed, and the disc cannot be
removed from the System.
CD
Tray
CORRECT INCORRECT
Starting to play disc(s)
Press the (^1 SELECT (PLAY) button. The player starts
to play from the disc indicated in the display window.
Press one of the DISC 1 through 3 buttons and the player
plays the disc you pressed, from the 1st track. For
individual track selection, use the number keys (1 to 10
and -
h IO button) on the remote control.
©
= (D
or I
0
I o,.c (a) )
©
When you start play, the display window shows disc number
and the track number being played.
If the disc is a Video CD, the VCD indicator on the front panel
will light up.
Using number keys______________
Press the number keys to select numbers.
On the remote control..... 1 to 10 and +10 key
Example: For number 5, press 5. For number 15, press +10,
then5. For number 20, press+10, then 10. For track 32, press
+10 three times, then 2.
1 2 3
(-----) ( ) ( )
UANUAL P*- II STILL
- SEARCH - «
CT 3 „„CID CD
CD CD
CCM) CHANNEL
10
-fio CD CD
9
Page 12