JVC CA-V605T - Manual (Page 27)

RECORDING
You can record using deck B, connected VCR and connected
digital recording equipment.
Recording tapes________________
You can use type I and II tapes for recording.
You can only record on deck B.
Operation
1. Press EJECT for the deck B.
2. Put in the cassette to record onto, with the exposed
part of the tape down.
3. Cióse the cassette holder gently.
4. Press REC START/STOP so that the REC indicator
lights up.
5. Start playing the source — FM, AM, CD player, deck A,
or auxiliary equipment connected to VCR and AUX
jacks by pressing the desired button.
When the source is deck A, you can also use the dubbing
method. (See “Dubbing Tapes.”)
To stop recording, press REC START/STOP button.
To stop recording temporarily, press REC PAUSE on the
remote control.
To resume recording, press REC START/STOP button or ◄/
► button on the remote control.
To record a tape with the Dolby NR system (except when
the source is deck A)
Press DOLBY B NR to activate the Dolby B NR system.
The DOLBY B NR indicator lights up.
To cancel the Dolby NR system, press the button again so
that the indicator turns off.
To record on both sides — Reverse Mode
Press REVERSE MODE so that the REVERSE MODE indica­
tor lights up.
When the source is deck A, see “Dubbing Tapes.”
To cancel Reverse Mode, press the REVERSE MODE
button again so that the indicator ¡2 turns off.
To record a tape with the sound modes (except when the
source is deck A)
Before you start recording, select the sound mode you want by
pressing the SOUND MODE button. You can record in anyone
of the modes.
Dubbing tapes
You cannot dub tapes with the sound modes.
It is preferable that the tape type (type I or II) you record from
be the same as the tape type you record onto when dubbing
tapes.
Operation
1. Put the source cassette in deck A, and the cassette to
be recorded onto in deck B.
2. Press DUBBING button on the front panel.
Dubbing starts. (The System will automatically find the
begining of both tape and start to record).
To stop during dubbing, press REC START/STOP button.
To dub both sides — Reverse Mode
Press REVERSE MODE so that the Reverse Mode indicator
is lit, and start from the front sides for both deck A and B.
To cancel Reverse Mode, press the REVERSE MODE
button again so that the indicator turns to ^ ■
Note
The Dolby NR system is inactive during dubbing
The dubbed tape automatically contains the same processing
as the source tape. The DOLBY B NR indicator automatically
turns off.
To protect your recording
Cassettes have two small tabs on the back to protect unex­
pected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with adhe­
sive tape.
When using type 11 tape, be careful not to cover the holes used
to detect the tape type.
- CAUTION---------------------------------------------------------------
The use of the 120 minutes long or thinner tape is not
recommended, since characteristic deterioration may occur
and this tape easily jams in the pinch-rollers and the
capstans.
Page 23