To find the beginning of the current song, Operation, Press eject for both decks – JVC CA-V605T User Manual
Page 26: Close the cassette holders gently, To stop play, press the ■ stop/cancel button, When reverse mode is off, Locating the beginning of a song — music scan, Continuous play playing tapes in deck a and b, Fast forward/reversing tapes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CASSETTE DECK
Locating the beginning of a song
— Music Scan___________________
You can use Music Scan to locate the beginning of a song.
Music Scan searches for blank portions that usually separate
recorded songs, then plays the next song.
To find the beginning of the current song
During play, press
PREV/NEXT in the opposite
direction to the tape play.
Searching stops automatically at the beginning of the current
song, and the current song starts again automatically.
To find the beginning of the next song
During play, press
PREV/NEXT in the same direc
tion as the tape play.
Searching stops automatically at the beginning of the next
song, and the next song starts automatically.
On the remote control, to locate the beginning of the current
or next song, press
buttons.
Notes
•
You may stop music scan and start play again by pressing
the TAPE button.
* Music Scan works by detecting a 4-second long blank
between each song, so it won’t work well in the follow
ing cases.
• No blank at the beginning of a song.
• Noise (often caused by much use or poor quality dub
bing) which fills the blank with noise.
• Long, very soft passages or pauses in a song.
Continuous play
Playing tapes in deck A and B_____
You can play tapes in deck A and B continuously.
Operation
1. Press EJECT for both decks.
2. Put cassettes into both decks, with the exposed part of
the tape down.
3. Close the cassette holders gently.
4. Press TAPE and the Player will start the side the
tape indicator shows.
The direction indicator starts blinking and tape play starts.
When a tape finishes playing, the unit checks to see if a
tape is in the other deck. If one is there, it automatically
starts playing it.
To stop play, press the ■ STOP/CANCEL button.
Notes
— How Continuous Play actually works —
When Reverse Mode is on;
• After the reverse side of the tape finishes playing, the tape
in the other deck starts playing. The tapes continue to play
in the sequence below.
Fast forward/Reversing tapes_____
To fast forward/reverse tapes, first press the ■ STOP/
CANCEL button and the one of the M^/^M PREV/NEXT
buttons.
□ <#% / »il
RETURN
y
NEXT //
—r^_____ /
(Front panel)
On the remote control, press the ■ STOP and then one of
the
buttons.
( )
(Remote control)
When Reverse Mode is off:
• After one side of the tape finishes playing, the tape stops.
Page 22