JVC CA-V605T - Manual (Page 20)

OPERATION OF PLAYBACK CONTROL FUNCTION
Playing Video CDs
with Playback Control
function
This System provides a Playback Control function which
utilizes a procedure (menu selection) programmed in a video
CD. The playback operation procedure may differ depending
on the disc you use.
The Playback Control function is described below and in the
figure.
• High-resolution still image display - Super-fine reproduc­
tion of still images with more than 4 times the resolution of
video tape.
• Menu-driven playback - interactive menus for easy selec­
tion of tracks
Preparations
• A video CD with the Playback Control function is required
for this operation.
• The buttons available for use are on the remote control, are
the [^/►►l PREV/NEXT buttons, CD SELECT
button, DISC (1 through 3) buttons, ¡Ti RETURN button
and the number keys.
Button functions
!◄◄/►►) PREV/NEXT buttons .. Move through menu.
(~) CD SELECT button............ Starts up a video CD with the
PBC function in DISC tray 1
to 3.
DISC (1 through 3) buttons....... Start up a video CD with the
PBC function in the specified
DISC tray.
<5^ RETURN button................ Returns to the menu.
Number keys and +10 button ...Select a specific menu item
from the
television screen or monitor.
MANUAL SEARCH..... To use manual search while
playing a video CD, hold
down the SHIFT button, and
press the MANUAL
SEARCH button on the re­
mote control.
Note
Sometimes due to improper manufacturing video CDs will
function differently.
Operation
1 . Press the DISC (1 through 3) or CD SELECT button, and
then the Player starts up the PBC function. “PBC” is
shown In the Display window.
I © II
I © I (g) I or
[ 0 ili I
UIDEO CD —PBC
2. To move through the menus, press the PREV/
NEXT buttons.
i /STOP/CANCEL/ I
KW / □ cr% / >CH I
PHEV ^RETURN / N0a jj
or ( ) CZ3
(Front panel) (Remote control)
3. When the menu you want appears, select an item in the
menu by using the number keys. The numbers on the
number keys correspond to the menu item numbers.
On the front panel
Press the VCD NUMBER button CEJICU and then ^
CD SELECT button.
On the remote control
Press the number key and your selection will start to play.
4. To return to a menu and stop the track being played,
press the (Ti RETURN button.
or
(Front panel) (Remote control)
Notes
•
Page numbers in the menu show that preceding pages
exist. To move from the current menu, press the !◄◄/►►)
PREV/NEXT buttons.
• When you press number keys, the track will start playing
without pressing the ► SELECT button.
• When there is only one menu, pressing the NEXT button
will cause the System to start playing.
Page 16