Toshiba MA-191 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clerk Locks
These locks are used to identify which clerk
is operating the register.
CLERK KEYS (CL 1, CL 2. CL 3. CL 4)
Each clerk should keep his/her clerk key. The register
will not operate unless one of these keys is inserted
and set to the corresponding position on the Clerk
Locks. Each of the keys may be inserted and pulled
out in the neutral position marked with the (point).
NOTES:
1. The push-style Clerk Keys may be installed in place of the Clerk
Locks. In that case, four Clerk Keys will be installed as the
standard feauture, and nine Clerk Keys as an optional feature.
2. The Clerk Locks or push-style Clerk Keys may be used as Major
Group Keys if so programmed in the system option.
This lock is provided to read or reset the accumulated
sales totals not on the daily but on weekly or monthly
basis.
GTX Position:
This positition allows to read the accumulated totals.
The GTX Key and GT2 Key can access this position.
GT2 Position:
This position allows to read and reset the accumulated
totals.
The GT2 Key can access this position.
NOTE: When the GT Lock is turned to either the GTX or GT2
position, the Mode Lock position and any Clerk Key
ON/OFF condition will be disregarded.
- 3 -