Toshiba MA-191 - Manual (Page 57)

NOTES: 1. Among ITXI/Ml (ITX/M[). ITX2/ m 1. and |SI/ m |. depress
the key(s) for the required status change(s) for each
department. The IRTN MDSE | is depressed to set or reset
the negative DEPT status.
2. Depressing any of the three keys above,
status reverses. For example, depressing
reverses a non-taxable DEPT to a taxable,
to non-taxable. Each department status is
number indicated on the display when
ment key is depressed in tlie aixve cperaticn.
and their respective statuses are:
the related
the rxx 7 m 1
or taxable
read by the
each depart-
The numbers
Non-taxable, no S.I. status
Tax
Tax
Tax
S.I,
Tax
Tax
Tax
1 only
2 only
1 and Tax
only
1 and S.I,
2 and S.I,
1 and Tax 2 and S.I.
Watching the number, adjust the status by depressing
those keys. See the examples below:
'STATUS NUMBER
BEFORE change '
0
0
0
KEY-IN FOR CHANGE
PRIOR TO [ dept ]KEY
ITXI/Ml
[TXI/MIITX2/MI
NEW NUMBER AND
STATUS OBTAINED
I f x i / M l I S I / M l
KTaxl only)
3(Taxl and Tax2)
5{Taxi and S.I.)
etc.
ITXI/Ml
|TX2/M|
iTXl/Ml|TX2/M|
0(Non-txbl,no SI)
3(Taxl and Tax2)
2(Tax2 only)
etc
jTXl/Ml
ÏÏÏHKi
6(Tax2 and S.I.)
3(Taxl and Tax2)
etc.
3. In order to simplify the status setting operation, each
department status may be reset to "0" by entering "0"
and depressing the department key. (This can only be
done after a GTZ reset and a PLU Z reset.) Then the
required status is set simply by depressing the keys
ITXI/Ml ( f T X / M l ) , |TX2/M[, and/or |SI/M|, only once.
- 53 -