RCA VR634HF - Manual (Page 66)

APPENDIX: REFERENCES
TROUBLESHOOTIN6 TIPS (CONT.)
WILL NOT RECORD OR PLAY
• Check to make sure there is a tape in the VCR.
• Try ejecting and reinserting the cassette.
• Check to make sure the tape is not broken.
• Check to make sure the VCR is not in pause mode. Press PAUSE or
PLAY to return to normal playback.
• Check the Project Plus'^” feature.
REWIND DOES NOT OPERATE
• Check to make sure the tape is not already rewound.
VCR PLUS PROCRAMMINC SYSTEM OR TIMER
RECORDING NOT MADE OR WRONG PROGRAM
RECORDED
Check to make sure the correct VCR Plus+ code is entered.
Check to make sure the cable box or satellite receiver was turned on
when recording was to begin.
Check to make sure the program was entered correctly (wrong
channel or times).
Power interruption. Reset the clock.
Check to see if time and date are correct - including AM/PM.
Check to make sure the program did not exceed the tape's length or
the tape was not rewound beforehand.
Check to make sure the VCR was turned off at the time recording
was to start.
Check to make sure there was a tape in the VCR and the cassette's
safety tab was intact.
VCR ejects cassette when the end of the tape is reached during a
timer recording.
Check to make sure VCR Plus+ setup was completed correctly.
WILL NOT RECORD
Check to make sure the safety tab is intact.
Check to make sure the VCR is not in the line mode. Press INPUT on
the remote.
CLOCK SHOWS INCORRECT TIME OR DATE
• Power interruption.
• Check to make sure the clock is set accurately (check AM/PM and
date).
• Check Daylight-Saving setting. The clock may have adjusted for
daylight-saving time.
TIME DID NOT ADJUST FOR DAYLIGHT-SAVING TIME
• Check to make sure daylight-saving feature is set correctly.
64