RCA VR634HF - Manual (Page 26)

VCR BASICS
REMOTE BUTTONS
The remote control is capable of controlling your VCR and many
brands of televisions. If you have an RCA, GE, or PROSCAN TV,
you may be able to control it without having to program the
remote.
COMPONENT BUTTONS
ON*OFF Turns off VCR when remote is set to control the VCR.
Also turns some compatible components on and off.
TV Turns on a compatible RCA, GE, or PROSCAN TV and sets the
remote to control the TV. Also used with the ON»OFF button to
turn on a different brand of TV (if programmed) and sets the
remote to control the TV.
VCR Turns on a compatible RCA, GE, or PROSCAN VCR and sets
the remote to control the VCR.
VCR FUNCTION BUTTONS
CHAN Up or Down Selects next higher or lower channel in the
VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the dock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FORWARD Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow
motion during play-pause and increases slow-motion speed.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels. In menu mode, press
to go back to a previous menu.
INFO Shows the status displays on the TV screen.
INPUT Selects between the VCR's line input or tuner. Line input
refers to the signal coming from the component connected to
the AUDIOA/IDEO IN jacks on the back (LI) or front (L2) of the
VCR.
MENU Brings up VCR MAIN MENU on the TV screen.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 - - appears on the screen. Then press the other
two numbers.
14