Other features, Reception, Tape playback – RCA VR634HF User Manual

Page 53

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OTHER FEATURES

A U D I O

R e c e p t i o n :

S T E R E O

2 T a p e P l a y b a c k :

H I - F I

Q E x i t

Now you are ready to select an item from the menu to set up.

RECEPTION

Some TV programs are broadcast with stereo audio or a

Second Audio Program (SAP) which offers a second language.

The reception feature lets you select the type of audio you want

to record. Press 1 to switch between Reception: STEREO, MONO,

and SAP.

•

Select STEREO for normal or stereo broadcast TV recording.

•

Select MONO if the stereo signal is weak and the sound is too

noisy.

•

Select SAP to record a Second Audio Program instead of

normal audio on both the Hi-Fi and linear tracks.

TAPE PLAYBACK

The VCR records the same audio on both Hi-Fi and linear tracks

on the tape. Hi-Fi sound is recorded on a separate left and right

stereo channels. Monaural sound is recorded on the linear track.

Press 2 to switch between tape playback: HI-FI, LINEAR, and MIX.

To enjoy Hi-Fi sound, connect your VCR to a stereo television or

amplifier/receiver using the AUDIOA/IDEO jacks. The Tape

Playback feature lets you select which audio you use during
playback.

•

Select HI-FI to play back sound recorded on the Hi-Fi track

and for normal use.

•

Select LINEAR to play back sound recorded on a linear

monaural track, such as a Second Audio Program (SAP),

or a dubbed voice.

•

Select MIX to play back the sound recorded on both the

linear and Hi-Fi tracks, sound-on-sound.

To receive Hi-Fi stereo sound, use

audio-video cables with a compatible

TV or receiver. Using only the RF OUT
jack will not produce stereo sound.