Usino two vcrs for copying and editing tapes, Recording – RCA VR634HF User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RECORDING

USINO TWO VCRS FOR COPYING AND

EDITING TAPES

Use one VCR as the

playback VCR

and the other as the

recording VCR.

1. Connect the VCRs using the diagram at the right.

2. Turn on both VCRs and TV.

3. Tune the TV to the VCR viewing channel (either 3, 4, or TV's

video input). (See page 68 for more information)

4. If you are using coaxial cables for the connection, tune

recording VCR

to channel 3 or 4—^the one selected on the

playback VCR

If you are using audio/video cables, select the line input on

the

recording VCR

5. Insert the tape you want to copy into

playback VCR.

Insert a

blank tape with its safety tab in place into record/ng

VCR

6. Using visual search, locate the segment you want to copy on

the

playback VCR.

Pause the tape at this location

7. Press RECORD on the

recording VCR,

then PAUSE

8. Press PAUSE on both VCRs to begin copying

9. Press PAUSE on both VCRs to stop copying

10. Repeat steps 6-9 to copy or edit additional segments.

Caution:

The unauthorized recording of

satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.