1cva147c rf output adapter, Vh54 cable transformer, Vh83 audioa^ideo cable – RCA CC643 User Manual

Page 67

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1CVA147C RF Output Adapter

This RF output adapter is used with a

coaxial RF cable, such as VH82 or VH90,

to connect your camcorder to a standard

TV (one without audio/video inputs) for

playback. If your antenna cable is the flat

twin-lead type attached by two screws,

you will also need a 300-to-75 ohm

transformer. If your TV has 300 ohm

antenna screw terminals, you will need an

optional 75-to-300 ohm transformer such

as VH54.

Coaxial RF Cables

VH82 (6-ft)

VH90 (12-ft)

VH54 Cable Transformer

This 75-to-300 ohm transformer is used to

connect a standard 75-ohm antenna cable

(such as VH82 or VH90) to the 300 ohm

screw terminals on a TV.

VH83 AudioA^ideo Cable

This six foot audio/video cable can be

used to connect the camcorder to a TV

monitor or VCR for tape playback or

copying tapes.

These RF cables are used with the RF

output adapter to connect your camcorder

to a standard TV (one without audio/

video input jacks) for playback. If your

TV has 300 ohm antenna screw terminals,

you will need an optional 75-to-300 ohm

transformer such as VH54. If your

antenna cable is the flat twin-lead type

attached by two screws, you will also

need an optional 300-to-75 ohm

transformer.

AH25 Y-Adapter

This Y-adapter allows you to connect your

camcorder’s mono audio cable to a stereo

TV or VCR.

All

specifications

and

descriptions

accessories

arc subject to change without notice

This manual is related to the following products:

CC641