Using the cassette adapter, Install cassette adapter’s battery, Insert cassette into cassette adapter – RCA CC643 User Manual

Page 55

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Cassette Adapter

The camcorder uses a smaller size cassette, but records in standard VHS format. The

cassette adapter allows you to play your VHS-C cassettes in a VCR just like other

standard VHS cassettes.

Insert the VHS-C cassette into the cassette adapter. Insert the cassette adapter into the

VHS VCR like a normal VHS cassette.

Install Cassette Adapter’s Battery

Remove battery compartment cover.

Install supplied “AA” battery so

positive (+) and negative (-) ends

align properly with (-I-) and (-)

terminals in battery compartment.

Replace battery compartment cover.

Notes:

Replace the battery when the load time

becomes much longer than normal.

Remove the battery from the cassette adapter
if it will not be used for a month or more. This
will prevent possible damage from battery
leakage. If leakage occurs, wipe up the liquid
inside the compartment and replace the battery
with a new one.

Insert Cassette into Cassette Adapter

Tape Wheel

Before inserting the cassette into the

adapter, remove any slack in the tape

by turning the tape wheel on the side of

the cassette.

Slide

EJECT

to the right to open the

cassette compartment lid.

Cassette
Compartment
Lid

Switch

3. Insert the cassette with the tape

window on the left and facing up.

Allow the cassette to drop into the

adapter. Do not force the cassette.

This manual is related to the following products:

CC641